Product Description:

The MDD112D-L-015-N2M-130PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers in applications that require accurate torque and position control, including industrial automation cells, material-handling axes, and machine-tool feed drives. The motor connects directly to the driven load and converts electrical input into controlled rotary motion without requiring an intermediate gearbox. That arrangement helps the drive system maintain precise axis coordination during indexing, contouring, and other motion tasks where repeatable response is important.

This unit can deliver a continuous standstill torque of 38.0 Nm, which supports holding force and low-speed operation in demanding motion sequences. Under nominal excitation, the rotor reaches 1500 rpm, giving the motor a moderate top speed suited to stable and accurate axis movement. Mounting uses a centering diameter of 130 mm, which helps align the motor housing with the mating machine surface. The output uses a keyway shaft for positive torque transmission to couplings or pulleys, and a shaft seal helps protect the bearing area from contamination. Power and feedback conductors exit on side B, which can simplify cable routing when the machine layout places service access behind the motor.

Motor power is routed through a sealed connector, which keeps the electrical interface compact and protected. Rotor position is reported by an integrated multiturn absolute encoder, and closed-loop operation uses digital servo feedback signals that are compatible with matching Indramat drive electronics. The housing is arranged for surface cooling, so airflow over the exterior helps remove heat from the stator without adding a liquid-cooling circuit. The motor is supplied without a blocking brake, so any vertical or suspended load must be secured by external holding hardware or by controlled motor torque when the system is powered down.