MDD112D-L-015-N2L-130PB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911285564
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
4 Seconds
The Bosch Rexroth Indramat MDD112D-L-015-N2L-130PB1 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. It provides a continuous torque at standstill of 38.0 Nm and a holding brake torque of 14.0 Nm. This motor features surface cooling, digital servo feedback, and a centering diameter of 130 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD112D-L-015-N2L-130PB1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed as a motor for digital drive controllers, it converts regulated electrical input into precise shaft rotation for indexing tables, gantry axes, and other factory motion sequences. By combining permanent-magnet excitation with closed-loop feedback, the unit delivers repeatable velocity and position regulation that is essential for modern automated lines. It is suited to applications that need accurate positioning as well as stable speed control over repeated cycles. This operating behavior supports synchronized motion during starts, stops, and direction changes.
Its mechanical output baseline is a continuous stall capability of 38.0 Nm, allowing the axis to support static loads without drift when energized. During normal running, the rotor reaches a nominal velocity of 1500 rpm, a speed that balances torque delivery with throughput demands. An integrated blocking brake supplies 14.0 Nm of holding torque, so vertical or suspended axes stay secured after power removal. Accurate control loops are assisted by digital servo feedback, which streams high-resolution position data to the drive for rapid corrections during motion. Mounting into a machine frame is simplified by a centering pilot of 130 mm, which keeps the motor concentric with gearboxes or couplings and helps reduce vibration.
Thermal management is addressed by a housing prepared for surface cooling, permitting external fans or cold plates to keep winding temperatures stable during extended duty cycles. This arrangement helps remove heat from the motor body in applications with long operating periods. Power and feedback leads exit on side B, and the plug-in connector format provides a compact electrical interface for the cable set. The cable exit orientation can also help keep adjacent machine hardware unobstructed. Torque is transferred through a keyway shaft end, allowing positive locking with standard keyed hubs and helping prevent slip under cyclic loads.
Frequently Asked Questions about MDD112D-L-015-N2L-130PB1:
Q: Does the MDD112D-L-015-N2L-130PB1 motor come with a holding brake?
A: This model is equipped with a blocking brake that delivers a holding brake torque of 14.0 Nm.
Q: What is the continuous torque at standstill for the MDD112D-L-015-N2L-130PB1?
A: The continuous torque at standstill for this unit is 38.0 Nm, providing reliable holding force during operation stops.
Q: What type of feedback system does the MDD112D-L-015-N2L-130PB1 motor use?
A: This version features digital servo feedback (DSF) for motor feedback.
Q: Where is the electrical connection located on the MDD112D-L-015-N2L-130PB1, and what type does it use?
A: The electrical connection for this model is configured on Side B using a connector.
Q: What cooling method does the housing of the MDD112D-L-015-N2L-130PB1 support?
A: The MDD112D-L-015-N2L-130PB1 supports surface cooling housing, which enhances heat dissipation during high-demand cycles.
