Product Description

The MDD112C-N-030-N2M-180PA0 servo motor has a 3000 revolution per minute nominal speed. The motor has a motor length of C and a size of 112. The motor feedback is a digital servo feedback with an integrated multi-turn absolute encoder. The MDD112C-N-030-N2M-180PA0 motor has a custom pilot centering diameter of 180mm. It is driven by an output shaft with keyway designed for lesser demands and form-fitting torque transmission. This motor does not have a holding brake. Falling into the normal balance class, this servo motor will handle normal applications exceptionally. This balancing is done to include the entire key in the output shaft. The power connector is located on the A side of the motor.

This motor’s continuous current is 43.4 Amps when at standstill its continuous torque is 28 Nm at standstill. The constant torque at 20 degrees Celsius is 0.65 Nm/A. The Peak current is 166 amps. The MDD112C-N-030-N2M-180PA0 motor is 48 kilograms in weight. The Windings resistance is at 20 degrees Celsius is 0.14 Ohm. 

The MDD112C-N-030-N2M-180PA0 motor can be installed in any mounting orientation. These MDD synchronous motors operate efficiently without needing maintenance because of their lifetime lubricated bearings and brushless design. For optimal performance, ensure that the terminal diagrams provided by the manufacturer of the machine are followed when the motor is being wired. Additionally, ground the MDD112C-N-030-N2M-180PA0 motor to the drive amplifier during installation. The standard housing design aids in maintaining temperatures best suited for machine performance. The black prime coating on the housing resists chalky build-ups and yellowing. For added cooling, a surface cooling unit can be mounted to the motor. If a blower is used, it will be connected using a protective motor switch and it will operate independently of the controller.