MDD112C-N-030-N2M-180GA0
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911257756
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MDD112C-N-030-N2M-180GA0 Servo Motor is manufactured by Bosch Rexroth Indramat. This unit operates with a 3000 Min nominal speed, Digital Servo Feedback with integrated multiturn encoder , a(n) Plain Output Shaft, and it is Not Equipped with a blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD112C-N-030-N2M-180GA0 digital AC servomotor manufactured by Bosch Rexroth has a 12-pin flanged socket for its feedback connection. This motor incorporates an optical encoder system. The product attains its maximum speed based on the DC bus voltage generated by the supply source at the drive. This device has a maximum duty cycle time of 15ms. The unit features a mass of 48kg without a blower attachment. Its operating curves depict the torque-limiting data and speed-limiting data. The motor encounters both radial and axial forces during operation. This product includes a plain and smooth shaft. The device cannot be used without the drive controller.
This motor is excited by permanent magnets and supports electronic commutation. The unit has low inertia because of the choice of materials for the magnets. It has a high degree of operational reliability. This product comprises fixed and floating bearings on the B side and A side respectively. The device shaft renders non-positive shaft-hub-connections. This unit features digital servo feedback with an integrated multiturn encoder. It is meant to be put to use between 0°C and 45°C. The motor housing and covers are designed in adherence to DIN 40 050 guidelines and specifications. This product has IP 65 protection rating for the output shaft.
The device has a 9Hz to 200Hz frequency range for its longitudinal and lateral axes with sinusoidal oscillations. This unit encompasses a black prime coating over its housing. It supports mounting mode as per Design B14 by using a mounting flange with threads. The motor installation is permissible either horizontally or vertically as per DIN IEC 34-7 specifications. This product needs to be protected against liquid accumulation around the shaft for a prolonged period with IM V3 and IM V19 mounting orientations. The device has a customized pilot diameter of 180mm. This servomotor dispatch worldwide is done with one-year backup support.
