Product Description:

Bosch Rexroth Indramat manufactures the MDD112C-N-030-N2L-180PA1 within the MDD Synchronous Motors series. The unit is a motor for digital drive controllers and serves as the primary rotary actuator in positioning tables, pick-and-place modules, and conveyor axes. In these applications, it converts controlled electrical input into rotary motion for indexing, positioning, and synchronized transport tasks. It has motor size 112 with length code C and a standard housing for this frame. The motor has a single shaft end, with the second shaft end omitted, which supports straightforward coupling to gearboxes or pulleys and keeps the overall layout compact.

Mechanical alignment during installation is guided by a centering flange measuring 180 mm in diameter. Under stall conditions, the motor can continuously deliver 28.0 Nm of torque, which supports static loads without additional cooling. An integrated blocking brake rated at 14.0 Nm locks the shaft when power is removed and helps prevent drift on vertical axes. The rotor is designed for a nominal speed of 3000 rpm, so compatible drive controllers can support rapid acceleration and short indexing moves. Position and velocity are returned to the controller through digital servo feedback (DSF), enabling closed-loop regulation and accurate electronic commutation during changing load conditions.

The electrical terminations are routed toward Side A, and the mating interface uses a sealed industrial connector that helps keep cable routing organized at the motor end. Rotor mass is ground to a standard balancing grade, which helps limit vibration during high-speed operation and repetitive start-stop cycles. A keyway shaft is provided for positive torque transmission to couplings or pulleys. The motor also includes a shaft seal that blocks lubricant migration and airborne contaminants at the shaft exit. This arrangement separates the cable entry area from the load connection point and supports stable mechanical power transfer in compact machine assemblies.