MDD112C-N-030-N2L-130GA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911261463
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
31 Seconds
The Bosch Rexroth Indramat MDD112C-N-030-N2L-130GA2 is a motor from the MDD Synchronous Motors series designed for digital drive controllers. It features a nominal speed of 3000 min⁻¹, continuous standstill torque of 28 Nm, and is equipped with digital servo feedback. The motor includes a 130 mm centering diameter, a plain shaft with shaft seal, and a holding brake with 40 Nm torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD112C-N-030-N2L-130GA2 is an AC synchronous motor manufactured by Bosch Rexroth Indramat and is part of the MDD Synchronous Motors series. Designed for digital drive controllers, it converts DC bus energy from an inverter into rotary motion for positioning and velocity control tasks in industrial automation. The unit belongs to motor size 112 and uses the C length code, providing a torque-to-inertia profile that suits medium-inertia axes in packaging machinery, material-handling portals, and similar installations.
At standstill, the rotor can deliver a continuous torque of 28.0 Nm, so thermal saturation is avoided during static load conditions. Under rated excitation, it reaches a nominal mechanical speed of 3000 rpm, matching common 50/60 Hz inverter outputs for synchronous operation. Assembly is centered with a 130 mm pilot diameter, ensuring concentric alignment with gearboxes or flanges. Power and feedback connections are on Side A, simplifying cable routing inside control cabinets when the motor is mounted with the shaft pointing forward. A keyed connector interface is used instead of a fixed cable, allowing quick exchange without re-terminating leads. Standard balancing and housing limit vibration and suit both horizontal and vertical installation orientations.
For dynamic braking and vertical axes, the motor is supplied with a blocking brake that develops 40.0 Nm of holding torque and locks the rotor when the controller removes excitation. Position feedback is provided through digital servo feedback, giving absolute position information for high-resolution closed-loop control. The drivetrain end uses a plain shaft, eliminating keys that could introduce backlash, and sealing is maintained by a fitted shaft seal to keep lubrication in and contaminants out.
Frequently Asked Questions about MDD112C-N-030-N2L-130GA2:
Q: Does the MDD112C-N-030-N2L-130GA2 motor come with a holding brake?
A: This motor includes a blocking brake that provides a holding brake torque of 40.0 Nm.
Q: What is the continuous standstill torque of the MDD112C-N-030-N2L-130GA2 motor?
A: The MDD112C-N-030-N2L-130GA2 can deliver a continuous torque of 28.0 Nm while at standstill.
Q: What type of motor feedback system is used by the MDD112C-N-030-N2L-130GA2?
A: This motor supports digital servo feedback (DSF) for precise position detection.
Q: What is the nominal speed of the MDD112C-N-030-N2L-130GA2 motor?
A: The nominal speed of the MDD112C-N-030-N2L-130GA2 is rated at 3000 min⁻¹.
Q: What type of shaft and shaft seal does the MDD112C-N-030-N2L-130GA2 motor have?
A: A standard plain shaft with a shaft seal is supplied with this motor, offering protection against contaminants.
