MDD112C-N-020-R2L-180GA1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911252192
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MDD112C-N-020-R2L-180GA1 Servo Motor is manufactured by Bosch Rexroth Indramat. This unit operates with a 2000 Min nominal speed, Digital Servo Feedback, a(n) Plain Output Shaft, and it is Equipped with a blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD112C-N-020-R2L-180GA1 digital AC servomotor by Bosch Rexroth operates in unison with only a digital drive controller from the manufacturer. This motor is widely used in grinding machines. The product has a C length code. The device has low inertia because of the choice of materials used to design the permanent magnets. The unit comes integrated with a temperature sensor in the windings that helps to avoid overload damage because of the temperature sensor in the windings. It is equipped with a blocking brake. The motor encompasses flanged sockets with connectors for its cable connection. The product is designed to function between 0°C and 45°C.
This device portrays IP 44 protection rating with a blower attachment. The unit has a maximum 6ms shock duration for the lateral axis. It has a continuous torque of 28Nm in standstill mode when natural convection is the cooling mode. The motor housing can have an additional paint layer of up to 40µm over the existing prime coat. The product is capable of incorporating Design B14 mounting by using a mounting flange with threads. The device has a 180mm customized pilot diameter. The unit with a plain output shaft achieves non-positive torque transmission. This MDD112C-N-020-R2L-180GA1 servomotor with a one-year warranty is shipped to any destination.
The motor supports a radial surface cooling mechanism. Its blocking brake has a voltage rating of 24VDC. This product has to be run without load at close to 100RPM speed for reseating purposes. The device has A side output direction for the power connection. The unit is associated with digital servo feedback that allows a relative indirect position evaluation. Its power cables with metric cable diameters can either be soldered or crimped. The product features an optical system measuring principle for its encoder. The device has a 5mH winding inductance. The unit starting action must be executed only by a fully trained electrician.
