MDD112C-N-020-N2L-130PL0
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911274169
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships Today
The MDD112C-N-020-N2L-130PL0 Servo Motor is manufactured by Bosch Rexroth Indramat. This unit operates with a 2000 Min nominal speed, Digital Servo Feedback, a(n) Output Shaft with Keyway, and it is Not Equipped with a blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD112C-N-020-N2L-130PL0 digital AC motor manufactured by Bosch Rexroth should not be operated without a drive controller. This servomotor is an apt option for high-precision applications. The product is used where a high degree of synchronization is required. The device has high contouring accuracy at high feed rates. The unit allows operation under poor or adverse environmental conditions. It is noted for its high performance. The motor shaft is subject to a wide range of external forces during operation. The product has a size code of 112. The device has separate flange sockets for connecting the motor feedback as well as power cables directly to it through connectors.
The motor is designed to operate between 0°C and 40°C. The product is protected against the penetration of water. This device can be operated in the stationary mode under weatherproofed conditions according to IEC 721-3-3 specifications. The unit comes along with a thermal time constant of 100 minutes when the natural convection cooling mode is used. The thickness of the painting layer on its housing must not exceed 40µm. This motor incorporates a B05 and supports mounting by means of a flange with through-holes having a pilot diameter of 130mm. The product comes with one-year backup support.
The device does not have any blocking brake. This unit has a plain output shaft that is capable of achieving a non-positive and backlash-free torque transmission. This shaft features a shaft sealing to prevent liquid penetration into the motor. This motor has a floating bearing on the Aside and a fixed bearing on the B side. The device has two M8 tapped holes on its housing to fix the lifting screws for holding it in place. The unit should be wired according to the manufacturer’s terminal diagram for the machine. It is possible to ship this motor to any destination.
