MDD112B-N-015-N2L-130PA2
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911271027
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MDD112B-N-015-N2L-130PA2 Servo Motor is manufactured by Bosch Rexroth Indramat. This unit operates with a 1500 Min nominal speed, Digital Servo Feedback, a(n) Output Shaft with Keyway, and it is Equipped with a blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth is a top-tier company with expertise in the production of servo motors, spindle motors, synchronous motors, linear motors, brake choppers, frequency converters, drive controllers, inverters, and drive converters.
The MDD112B-N-015-N2L-130PA2 model weighs 36 kilograms and has an inductance of 13 millihenries. With a moment of inertia of 120 x 10-4 kgm2, the model may revolve at a maximum speed of 1,500 RPM. At 20 degrees Celsius, the model has a winding resistance of 0.85 ohms and a torque constant of 1.25 Nm/A. The MDD112B AC servo motor contains a keyways output shaft and has a temperature sensor between the windings to avoid overheating. It employs both natural and surface cooling to evacuate heat from the housing and has a thermal time constant of 90 minutes. The servo motor requires clean, dust-free, and turbulent-free conditions to work ideally and provide a constant torque of 17.5 Nm while using a constant current of 14 A at standstill. With a maximum torque of 60.5 Nm and current consumption of 55.3 A, this low-cost AC servo motor is excellent for a range of mechanical systems. The MDD112B AC servo motor has an insulation grade of F and a protection category of IP65, with additional protection provided by a black paint coating with a 40-micron layer thickness.
The model MDD112B-N-015-N2L-130PA2 is equipped with a balancing class of N and a 3.5-kilogram blocking brake. Due to the efficient transfer of heat from the stator windings to the motor housing's an outside wall, the model's semantics and torque inertia ratio have been enhanced, along with its load characteristics. On the A-side of the motor housing, there is a power connector (sides are specified in the user manual).
