MDD112B-N-015-N2L-130GB0
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911259711
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MDD112B-N-015-N2L-130GB0 Servo Motor is manufactured by Bosch Rexroth Indramat. This unit operates with a 1500 Min nominal speed, Digital Servo Feedback, a(n) Plain Output Shaft, and it is Not Equipped with a blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD112B-N-015-N2L-130GB0 Bosch Rexroth digital AC servomotor can be installed in any orientation. This servomotor comprises a shaft sealing on the output shaft. The product has IP 65 degree of protection for the shaft as well as its power, blower and feedback connections. This device can be used for extremely demanding applications only with shock-damped or shock-decoupled mounting. The unit features a simple installation process. It incorporates surface cooling to accommodate extreme loads. This motor is characterized by high synchronous operation features. The product design features a floating bearing on its A-side. This device uses feedback to evaluate its speed and position.
The motor shaft supports non-positive shaft-hub-connections. This unit features an ambient operating temperature range of 0°C to 45°C. It must be allowed to cool down for a sufficient time before maintenance work on it. The product features protection against the penetration of extrinsic objects. This device has a maximum excursion amplitude of 0.3mm with sinusoidal oscillations for its longitudinal axis. The unit is ideal for applications like pressing and punching only if the appropriate measures have been implemented. It is possible to use an additional layer of paint of up to 40µm thickness for its housing. This servomotor is available with a year’s Wake Industrial warranty.
The motor must have no liquid penetration around the shaft. This product has a standard pilot diameter of 130mm for its shaft. The device is affected by axial and radial forces on the shaft when a load is applied to the shaft. This unit needs a blower fitting with 115VAC/230VAC supply voltage for continuous start-stop operation with a high frequency. It must be run at approximately 100rpm speed as part of the reseating process. The motor has a balance class of N for normal applications. The product supports the change of output direction of its angle feedback connector. This servomotor dispatch is done through reputed freight carriers.
