MDD112A-N-020-N2L-130PR0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911290721
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
11 Seconds
The Bosch Rexroth Indramat MDD112A-N-020-N2L-130PR0 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. This motor features a nominal speed of 2000 min⁻¹, a continuous torque at standstill of 10.5 Nm, and digital servo feedback. It has a 130 mm centering diameter, a keyway shaft with a shaft seal, and a standard housing without a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD112A-N-020-N2L-130PR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it is installed on automated axes where tightly regulated torque and velocity are required for positioning, packaging, or material-handling tasks in industrial automation. Its synchronous design supports responsive acceleration and stable speed regulation when paired with a compatible digital drive. This makes the motor suitable for closed-loop motion systems that must maintain repeatable movement under changing loads during frequent start-stop cycles.
This model delivers a continuous standstill torque of 10.5 Nm, allowing the axis to maintain load without overheating when the rotor is locked. Its nominal operating speed is 2000 rpm, matching drive systems that use a 200 Hz electrical frequency for stable process cycles. The centering pilot measures 130 mm, providing accurate alignment with machine flanges and minimizing runout. Frame designation 112 corresponds to the stator diameter, while motor length code A indicates the shortest rotor stack in this size, which lowers inertia for faster acceleration. Standard dynamic balancing limits vibration during high-speed operation, and the housing is standard, with no additional cooling fins or sealing modifications.
The power and feedback connectors sit on the right side, which simplifies wiring in cabinets laid out for right-hand routing. This orientation is indicated by the Right connection direction, and the plug-in Connector interface allows straightforward cable attachment. Positional data are returned through digital servo feedback, enabling the drive to close high-resolution control loops. At the output end, a keyway shaft couples torque without slip, and a shaft seal is fitted to limit dust and oil ingress around the journal. The shaft is provided only on side A, so no secondary extension occupies the rear of the motor. Because the motor is supplied without a blocking brake, any holding force while power is off must be created by external clamping devices or static gear trains.
Frequently Asked Questions about MDD112A-N-020-N2L-130PR0:
Q: What type of motor feedback does the MDD112A-N-020-N2L-130PR0 provide?
A: The MDD112A-N-020-N2L-130PR0 motor features digital servo feedback (DSF) for precise position detection.
Q: What is the nominal speed of the MDD112A-N-020-N2L-130PR0 motor?
A: This model has a nominal speed of 2000 revolutions per minute.
Q: How much continuous torque does the MDD112A-N-020-N2L-130PR0 provide at standstill?
A: It delivers a continuous torque of 10.5 Nm at standstill.
Q: What shaft configuration does the MDD112A-N-020-N2L-130PR0 feature?
A: The shaft of this motor is equipped with a keyway and a shaft seal.
Q: Does the MDD112A-N-020-N2L-130PR0 motor have a holding brake?
A: This motor does not include a blocking brake as part of its design.
