Product Description:

The MDD112A-N-015-N2L-130GA0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed to interface with digital drive controllers, it turns controlled current into repeatable rotary motion for positioning, indexing, and speed-regulated tasks in automated packaging lines, transfer stations, and machining cells. Its electromechanical layout supports medium-torque axes that require continuous feedback and stable duty cycles while maintaining a compact footprint in multi-axis assemblies. In closed-loop operation, the motor responds smoothly to changing command values, which helps the drive maintain accurate motion during repeated starts, stops, and speed changes.

The motor can deliver 10.5 Nm of continuous standstill torque without thermal overload under standard mounting conditions. During operation, it reaches a nominal speed of 1500 rpm, which suits applications that need steady synchronous running with moderate shaft speed. Precise alignment to the machine frame is provided by a 130 mm centering diameter on the flange. Cables exit on Side A and terminate in a keyed connector, which helps keep cable routing orderly in compact machine layouts. The housing supports convection cooling, so no auxiliary fan is required for normal heat dissipation.

Motion feedback is provided by digital servo feedback (DSF), which sends high-resolution position data to the controller for accurate regulation. Built on the 112 frame with motor length code A, the unit fits installations where axial space is limited but stable servo performance is still required. The output uses a plain shaft, allowing direct clamp coupling without a keyed connection. Because it is supplied without a blocking brake, any holding function at standstill must be handled by the drive or by an external mechanical device. An internal shaft seal helps limit lubricant loss and reduces the chance of contaminants entering the bearing area during normal machine operation.