Product Description:

The MDD093D-N-060-N2M-130PR2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts electrical power into controlled rotary motion for feed axes and auxiliary tasks in industrial automation cells. The design supports closed-loop operation with fast response, making the unit suitable for packaging lines, material-handling modules, and other machinery that requires accurate velocity and position control. Its operating concept is intended for applications where the drive must react quickly to changing command values while maintaining stable motion.

Under rated conditions, the motor delivers a continuous stall torque of 24.0 Nm, allowing it to hold load while stationary without overheating. At a nominal speed of 6000 rpm, it can follow rapid command changes from the drive, while the dynamically balanced rotor keeps vibration within the standard grade. A blocking brake integrated in the rear section holds the shaft with 22 Nm when power is removed, helping prevent unwanted motion on vertical axes. Accurate mechanical alignment is supported by a centering diameter of 130 mm, and position signals are returned to the controller through Digital servo feedback (DSF) for real-time torque and motion regulation.

Position data is generated by an integrated multiturn absolute encoder, so the axis retains absolute position after power cycling and can resume controlled motion without a homing sequence. The shaft uses a keyway profile and includes a shaft seal to help limit coolant or dust ingress at the output end. Power and feedback leads exit on the right side, and all terminations are made on a single connector to keep cable routing compact. The motor uses length code D and size code 093, and both the housing and balancing are standard. A standard shaft end on side A and no extension on side B keep the output arrangement simple for direct coupling.