Product Description:

The MDD093D-N-060-N2M-130PR1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for direct connection to digital drive controllers, the unit converts precision control signals into repeatable rotary motion for positioning tables, pick-and-place modules, and other automated machinery. Its electromechanical design combines permanent-magnet excitation with electronic commutation to sustain high dynamic performance across continuous duty cycles in industrial environments. It is well suited to applications that need accurate speed regulation and repeatable positioning during frequent start-stop operation.

At a nominal speed of 6000 rpm, the rotor can follow rapid index commands common on packaging or surface-mount lines. Energized at standstill, it provides 24.0 Nm of continuous torque, supplying holding force on vertical axes while maintaining the standard balancing grade to limit vibration. Position feedback is supplied by an integrated multiturn absolute encoder, and the controller processes it through digital servo feedback (DSF) so positional errors are corrected each cycle. This arrangement gives the drive immediate position data during startup and throughout motion. During power loss, a blocking brake with 11 Nm of torque locks the shaft to prevent back-driving. A standard housing dissipates heat without auxiliary cooling, and the 093 frame size fits machine layouts that use this mounting pattern.

A centering pilot of 130 mm aligns the motor flange with gearboxes or mounting plates, and the output shaft carries a keyway for slip-free torque transfer. Power and feedback conductors terminate through a connector on the right side of the stator, which keeps cable bends away from the machine's moving envelope. A shaft seal keeps internal grease separated from airborne contaminants, and the motor uses a single shaft end without a side B extension. The single shaft-end arrangement leaves the opposite side clear for close placement near adjacent machine components. Length code D gives the motor an extended axial package within this frame size.