Product Description:

The MDD093D-N-060-N2M-130PB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts drive current into accurately regulated mechanical motion for positioning tables, gantry axes, and similar machinery. Its electromagnetic design supports high dynamic response, which helps automation systems follow programmed profiles with tight velocity and position control. The motor is intended for closed-loop axis applications where fast acceleration and stable motion are required during repeated operating cycles.

At standstill, the rotor can sustain 24.0 Nm of continuous torque, so static loads remain supported without thermal overload. During operation, it reaches a nominal speed of 6000 rpm, which broadens the usable speed range for fast indexing applications. An integrated brake supplies 22 Nm of holding torque to secure the shaft when power is removed. Mounting is centered by a 130 mm pilot diameter that aligns the stator housing to the machine frame, while the electrical and feedback connectors are oriented on side B, simplifying cable routing when access is best from that direction.

Power and feedback connect through a sealed connector interface that permits rapid connection without rewiring. Position data is returned through digital servo feedback, allowing the controller to correct load disturbances during each control cycle. The steel shaft has a keyway to prevent rotational slip between the motor and the driven element, and a lip seal helps keep lubricant from entering the motor interior. An integrated multi-turn absolute encoder tracks several revolutions, so position information remains available after shutdown. Additional features include standard balancing to reduce vibration, a D-length housing for higher power density, and a standard single-ended shaft with the opposite side closed.