Product Description:

The MDD093D-N-060-N2M-130PA1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for use with digital drive controllers, it supplies rotary motion in automated machinery that requires accurate speed and position regulation. The motor uses permanent-magnet excitation and commutation sensors so the drive can close its control loops precisely. This arrangement supports accurate indexing, smooth speed changes, and coordinated axis motion in automated equipment.

At a continuous stall rating of 24.0 Nm, the motor can hold or slowly index a load without overheating during steady operation. When fully energized, it reaches a nominal mechanical speed of 6000 rpm, supporting applications that demand rapid cycle times. A centering diameter of 130 mm aligns the motor flange with gearboxes or machine frames and helps maintain concentricity during high-speed rotation. Power and feedback plugs are routed on Side A, which can simplify cable runs in layouts arranged for one-sided access. Motion feedback is supplied by an integrated multi-turn absolute encoder; this sensor returns shaft position over multiple revolutions and lets the controller retain absolute position information after power loss.

An internal blocking brake generates 11 Nm of static torque so vertical axes can stay in position when the drive is disabled. Contamination ingress is limited because the output shaft is equipped with a shaft seal, which supports use where dust or coolant contact may occur. The motor transmits position data through Digital servo feedback (DSF), giving the drive high-resolution incremental and commutation information for tight current loops. Its mechanical stack uses length code D, which indicates a longer active section within the 093 frame. This longer section adds active length and thermal mass for sustained servo operation without changing the basic frame diameter.