Product Description:

The MDD093D-N-060-N2M-130PA0 synchronous servo motor is manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for use with digital drive controllers, it supplies precise rotary motion for indexing tables, rotary transfer mechanisms, and other automated axis modules. Its permanent-magnet design and electronic commutation let the drive regulate torque and speed closely during starts, stops, and direction changes. In closed-loop systems, the motor converts current commands into stable mechanical output for packaging machines, printing presses, and general material-handling equipment.

At stall, the motor produces a continuous torque of 24.0 Nm, which supports sustained load handling when rated current is applied. The motor reaches a nominal speed of 6000 rpm, allowing high axis speed for short cycle applications. Accurate mounting is supported by a centering diameter of 130 mm, which helps seat the motor correctly on the machine flange. Rotor position is reported through digital servo feedback generated by an integrated multi-turn absolute encoder. This arrangement gives the drive continuous position data and allows the axis to recover its position reference after a shutdown without a separate homing move.

Power and feedback connections exit on Side A through a single industrial connector, which helps simplify cable routing in compact installations. The ground shaft uses a keyway for keyed couplings, and a shaft seal helps limit dust and oil ingress at the housing interface. The motor is supplied without a blocking brake, so load holding during power-off conditions must come from the drive or external mechanics. It uses standard dynamic balancing and a standard housing, and the shaft is present only on the drive side. The D length code gives the motor a longer body than shorter versions in the same frame.