MDD093D-N-060-N2M-130GR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Bosch Rexroth Indramat MDD093D-N-060-N2M-130GR1 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. This motor features a continuous torque at standstill of 24.0 Nm, a nominal speed of 6000 min⁻¹, and an integrated multiturn absolute encoder with digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-060-N2M-130GR1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for pairing with digital drive controllers, it converts regulated current into rotational motion for positioning, conveying, and general automation duties. The frame is based on the 093 size while the D length code provides additional active stack height for higher dynamic performance. This configuration supplies the speed, torque, and feedback precision required for reliable closed-loop motion in industrial equipment.
At the mechanical interface the housing presents a centering shoulder with a diameter of 130 mm that aligns the motor to gearboxes or machine frames. Continuous standstill torque is rated at 24.0 Nm, and standard rotor balancing lets the unit accelerate smoothly up to its nominal speed of 6000 min⁻¹. All power, brake, and sensor leads exit on the Right side through a single keyed Connector, simplifying cabinet wiring. The motor retains the manufacturer’s standard housing and employs the 093 frame with D length to support convection cooling under normal ambient conditions without additional airflow devices.
Feedback and braking functions complete the drive interface. An integrated multiturn absolute encoder communicates position data through Digital servo feedback (DSF), allowing the controller to track multiple revolutions without homing cycles. A blocking brake is fitted that supplies 11 Nm of static torque for holding vertical or suspended loads during power loss. The output side uses a Plain shaft protected by a shaft seal to restrict lubricant migration, and the design omits a side-B extension to minimize axial length. Together with the standard balancing, housing, and shaft-end configuration, these features suit installation in machinery that demands compact dimensions, quick electrical connection, and dependable torque delivery.
Frequently Asked Questions about MDD093D-N-060-N2M-130GR1:
Q: What is the continuous torque at standstill for the MDD093D-N-060-N2M-130GR1?
A: This motor provides a continuous torque of 24.0 Nm at standstill.
Q: What type of encoder is integrated in the MDD093D-N-060-N2M-130GR1 motor?
A: The MDD093D-N-060-N2M-130GR1 includes an integrated multiturn absolute encoder.
Q: Does the MDD093D-N-060-N2M-130GR1 have a holding brake and what is its torque?
A: A blocking holding brake with a torque of 11 Nm is equipped on this motor.
Q: What type of shaft and seal does the MDD093D-N-060-N2M-130GR1 feature?
A: The shaft on this model is a plain type and comes with a shaft seal for protection.
Q: What is the nominal speed of the MDD093D-N-060-N2M-130GR1 motor?
A: This motor is designed for a nominal speed of 6000 min⁻¹ (RPM).
