Product Description:

The MDD093D-N-060-N2M-130GR0 is a servo motor manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Built for use with digital drive controllers, this unit delivers controlled torque and rapid speed changes to automated axes used in packaging, printing, and general material-handling equipment. It combines a compact frame with a standard housing that allows direct installation on moving machine parts where precise rotary motion is required. This layout supports accurate motion control in applications that need repeatable positioning and stable speed regulation during continuous machine operation.

At standstill, the motor can produce a continuous torque of 24.0 Nm, providing suitable holding and acceleration capability for medium-load tables and spindles. When driven by a matched inverter, it reaches a nominal rotational speed of 6000 rpm, allowing high cycle rates without overspeeding the mechanical structure. Mounting is simplified by a centering diameter of 130 mm, which aligns the stator face precisely on machine frames and helps keep radial runout low. All power and feedback lines exit through right-side connectors, a layout that keeps cabling clear of adjacent machine elements in common gantry arrangements. Standard dynamic balancing helps reduce vibration, and the D-length stack within the 093 frame increases torque density while keeping the same general connector arrangement used across the series.

Control precision comes from the integrated multiturn absolute encoder, which reports rotor position across multiple revolutions and is processed through digital servo feedback for closed-loop regulation with very fine position resolution. The drive end uses a plain shaft without a side-B extension, which reduces inertia and simplifies coupling to the driven load. A factory-installed shaft seal helps protect the bearing from lubricant washout and airborne particles during operation. Because the unit is supplied without a blocking brake, static holding must be provided by external mechanical locks or drive torque. The plug-in connector system keeps motor and feedback connections orderly and supports consistent cable routing within the MDD motor range.