Product Description:

The MDD093D-N-060-N2M-130GB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed as a motor for digital drive controllers, it delivers closed-loop motion in automated assemblies such as pick-and-place axes, packaging stations, and winding equipment. Its compact construction and rapid torque buildup support repeatable positioning.

This motor can sustain a continuous standstill torque of 24.0 Nm, allowing it to hold or slowly move loads without exceeding its thermal limit. Under rated voltage and frequency, it reaches a nominal speed of 6000 min⁻¹, giving integrators a wide velocity range for high-speed applications. Accurate mechanical alignment is helped by the 130 mm centering diameter that mates to standard machine flanges. When power is removed, a blocking brake supplies 22 Nm of static torque, preventing axis drift on vertical or suspended loads. All power and feedback conductors exit on side B through a single circular connector, which keeps cabling clear of the driven shaft and simplifies service in densely populated cabinets.

Position data is transmitted via digital servo feedback (DSF), and the integrated multiturn absolute encoder retains rotational information across power cycles so homing routines can be skipped. A factory-installed shaft seal protects the bearing seats from coolant splash and airborne debris, while the plain shaft geometry accommodates zero-backlash clamp couplings without keyway tolerances. The motor’s electromagnetic length is identified as length code D, pairing this frame size with a longer lamination stack for higher torque density than shorter variants in the same diameter. Standard dynamic balancing minimizes vibration during continuous 6000 rpm duty, and the housing design follows the series conventions for footprint and mounting bolt pattern compatibility with previous MDD motors.