Product Description:

The MDD093D-N-060-N2M-130GB0 is a synchronous AC servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts regulated current into rotary motion for positioning axes and high-speed spindles in automated machinery. The model works in closed-loop systems that require precise torque and velocity control, making it a compact electromechanical actuator for coordinated industrial motion. This arrangement lets the motor respond quickly to changing command values while maintaining stable motion in automated equipment.

Mechanical output begins with a continuous standstill torque of 24.0 Nm, allowing the shaft to hold static loads without overheating. Under rated excitation, the rotor can reach a nominal speed of 6000 rpm, so the same frame can support both high-speed operation and lower-speed duty. Alignment to the driven machine is simplified by a centering diameter of 130 mm, which helps seat the motor accurately on the mounting face. Electrical and feedback terminations are routed on Side B, and the motor uses a plug-in connector rather than a fixed cable, which simplifies connection at the housing. The cast housing is supplied in the standard unvented configuration.

The feedback chain is closed by an integrated multi-turn absolute encoder, which delivers rotor position data through digital servo feedback (DSF) to the drive controller for each revolution and for retained position tracking after power-off indexing. The motor has a plain shaft finished without a keyway or a side-B extension, so torque is transferred through friction couplings while the opposite end remains closed. Contaminant ingress is limited by a shaft seal, which works with the standard housing to support IP65 protection. The D-length stator fits the size 093 frame, and the motor is supplied without a blocking brake to keep inertia lower.