MDD093D-N-060-N2M-130GA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
30 Seconds
The Bosch Rexroth Indramat MDD093D-N-060-N2M-130GA2 is a synchronous motor from the MDD Synchronous Motors series designed for digital drive controllers. It has a nominal speed of 6000 min⁻¹ and provides a continuous torque at standstill of 24.0 Nm. The motor features an integrated multiturn absolute encoder, digital servo feedback, and a 22 Nm holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-060-N2M-130GA2 is a synchronous AC motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it is used on servo axes that require precise speed regulation and coordinated motion with CNC or PLC systems. By converting commanded current profiles into mechanical rotation, the unit serves tasks such as tool spindles, pick-and-place heads, and indexing tables in industrial automation lines. Its synchronous design allows the drive to maintain stable motion during frequent starts, stops, and speed changes.
A centering pilot of 130 mm aligns the flange with mounting fixtures and provides a repeatable mechanical reference during installation. Under rated excitation, the shaft reaches a nominal speed of 6000 rpm, enabling high surface speeds without gearbox multiplication. At standstill, the electromagnetic package sustains 24.0 Nm, so static loads can be held while the motor is not rotating. Power and feedback conductors exit on side A through a sealed connector, which keeps cable routing consistent inside cabinets. Position feedback is supplied by an integrated multi-turn absolute encoder that reports both angle and revolution count, allowing the drive to recover absolute position after power interruptions without a homing routine. Standard dynamic balancing helps minimize vibration across the speed range.
The motor includes a blocking brake with 22 Nm of static holding torque to resist back-driving when power is removed. Its length code is D, giving an extended active core within frame size 093. A plain shaft is supplied with a factory-installed shaft seal, while the opposite end remains closed because the design uses a standard shaft end on the drive side only. The housing uses the standard construction for this motor type, and the encoder channel also supports digital servo feedback for closed-loop current and velocity control. This arrangement is suitable for axes that must hold position at rest and return to commanded motion without losing reference information.
Frequently Asked Questions about MDD093D-N-060-N2M-130GA2:
Q: Does the MDD093D-N-060-N2M-130GA2 motor come with a holding brake?
A: This model includes a blocking brake with a holding torque of 22 Nm.
Q: What is the nominal speed of the MDD093D-N-060-N2M-130GA2 motor?
A: The MDD093D-N-060-N2M-130GA2 motor operates at a nominal speed of 6000 min⁻¹.
Q: What type of shaft and shaft seal does the MDD093D-N-060-N2M-130GA2 provide?
A: This motor is equipped with a plain shaft that includes a shaft seal for added protection against contaminants.
Q: What kind of encoder is integrated in the MDD093D-N-060-N2M-130GA2 motor?
A: It features an integrated multiturn absolute encoder for precise position feedback.
Q: What is the continuous standstill torque of the MDD093D-N-060-N2M-130GA2 motor?
A: The continuous torque at standstill for this motor is rated at 24.0 Nm.
