MDD093D-N-060-N2M-130GA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
34 Seconds
The Bosch Rexroth Indramat MDD093D-N-060-N2M-130GA1 is a motor from the MDD Synchronous Motors series designed for digital drive controllers. It offers a continuous torque at standstill of 24.0 Nm and a nominal speed of 6000 min⁻¹. This model has a plain shaft with shaft seal, a centering diameter of 130 mm, and features an integrated multiturn absolute encoder with digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-060-N2M-130GA1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where commanded current is converted into controlled rotary motion for pick-and-place modules, conveyors, and other automated axes. The 093 frame size gives the motor a moderate external diameter, while the standard housing and standard rotor balancing help it fit established machine layouts without added vibration correction. Because it is a synchronous design, it can respond quickly to drive commands and maintain stable motion profiles across indexing, positioning, and continuous-running tasks.
During stall conditions, this model can generate a continuous torque of 24.0 Nm. It can accelerate loads to a rated operating speed of 6000 rpm without exceeding thermal limits under normal conditions. A blocking brake on the non-drive end provides 11 Nm of static holding torque, which helps keep vertical or over-running loads in place when power is removed. The brake is useful on axes that must remain stationary during shutdown or stop conditions. The centering pilot measures 130 mm in diameter for accurate coupling alignment, and service wiring exits at Side A to simplify cable routing in compact cabinets.
Position feedback is provided by an integrated multiturn absolute encoder that works with the drive's digital servo feedback interface to report shaft angle across multiple revolutions. Absolute position retention over multiple turns reduces the need for reference moves after restart, which is useful on axes that must resume with known position data. The motor uses a plain shaft with a factory-installed shaft seal, which helps protect the bearing area in light dust or light spray conditions. Its length designation is Code D, which adds active iron for higher power density without changing the mounting pilot. Power and feedback connections use connector-based interfaces, and the drive side has a single standard shaft end.
Frequently Asked Questions about MDD093D-N-060-N2M-130GA1:
Q: What type of encoder is included with the MDD093D-N-060-N2M-130GA1 motor?
A: This model features an integrated multiturn absolute encoder for precise position detection and feedback.
Q: What is the continuous standstill torque provided by the MDD093D-N-060-N2M-130GA1 motor?
A: The MDD093D-N-060-N2M-130GA1 has a continuous torque at standstill rated at 24.0 Nm.
Q: What type of shaft and sealing does the MDD093D-N-060-N2M-130GA1 have?
A: A plain shaft is equipped on this motor, with a shaft seal for added protection.
Q: How is the MDD093D-N-060-N2M-130GA1 electrically connected?
A: The connection is provided via a connector on Side A of the motor for electrical interfacing.
Q: Does the MDD093D-N-060-N2M-130GA1 motor include a holding brake and what is its rated torque?
A: This model comes with a blocking brake that offers holding brake torque of 11 Nm.
