MDD093D-N-060-N2M-110PR2

Product Description:

The MDD093D-N-060-N2M-110PR2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. As a motor for digital drive controllers it converts commanded current into rotary motion for tightly regulated axes in industrial automation. The design follows size 093 with the extended D length, and it incorporates a standard housing that supports the integrated multiturn absolute encoder required for closed-loop positioning tasks.

Its continuous torque at standstill reaches 24.0 Nm; this value determines the maximum static load the shaft can hold without overheating when the rotor is locked. During operation the rotor can attain a nominal speed of 6000 min⁻¹, allowing fast cycle times in pick-and-place or spindle drives. A built-in blocking brake delivers 22 Nm of holding torque to secure the axis when power is removed. Mechanical centering on the mounting flange is provided by a 110 mm locating diameter, ensuring concentric alignment with gearboxes or couplings. Power is transmitted through a shaft that is machined with a keyway so torque is transferred positively into the driven element.

The motor uses Digital servo feedback (DSF) together with the integrated encoder to relay absolute position data to the controller. Electrical power and feedback lines exit on the Right side through a sealed Connector, which simplifies cabinet routing in multi-axis assemblies. There is a shaft seal at the output end to restrict lubricant migration and protect the internal bearings against contamination. Standard dynamic balancing minimizes vibration, and the shaft is supplied only on side A, as defined by the standard side B-free shaft end. The unit’s construction, including standard housing and the blocking brake, matches ambient installation for drive systems that rely on rapid acceleration without sacrificing holding capability.