Product Description:

The MDD093D-N-060-N2M-110PR0 is a servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into rotary motion that can be tightly synchronized with position loops in automated machinery. The unit belongs to motor size 093 and carries length code D, placing it among the higher-output models in the family while retaining a compact housing for multi-axis assemblies on packaging, printing, or material-handling lines.

In operation, the motor supplies a continuous standstill torque of 24.0 Nm, so a driven axis can hold load while current is applied. When commanded by the drive, the rotor can reach a nominal speed of 6000 rpm, giving a wide mechanical speed range for high-speed positioning. A centering shoulder diameter of 110 mm aligns the motor accurately on machine frames. Power and feedback conductors exit on the right side through a sealed connector, which helps with cable routing in confined cabinets. Rotor position is resolved by an integrated multi-turn absolute encoder, which returns absolute shaft angle across multiple turns and removes the need for homing after power cycles.

The digital interface inside the motor streams feedback as DSF, allowing the drive controller to close high-resolution loops without external converters. The output uses a keyway shaft for torque transfer to standard pulleys or couplings. It also includes a shaft seal at the output end to help restrict oil or coolant intrusion. Dynamic loads are handled with standard balancing quality, and the motor is supplied without a holding brake, so external hardware must secure vertical axes during power loss. Its single-ended shaft arrangement leaves side B free, which helps preserve overall length in multi-motor fixtures.