Product Description:

The MDD093D-N-060-N2M-110PL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it forms the rotary element of compact automation axes, converting regulated current from an inverter into precise angular motion. By combining embedded digital feedback hardware with a torque-dense electromagnetic stack, the unit enables controller platforms to maintain accurate position and velocity in assembly cells, packaging machines, and material-handling equipment.

Key values describe its mechanical output and envelope. The motor supplies a continuous standstill torque of 24.0 Nm, giving machinery steady holding force without overheating, and its rated speed reaches 6000 rpm for rapid indexing duties. A centering diameter of 110 mm aligns the flange while maintaining the factory balancing standard. During power loss, a blocking brake applies 11 Nm of static torque to secure vertical loads. Dimensional codes further describe the build: the active core is identified as length code D, and the frame is size 093, a combination that enlarges thermal surface area yet fits common MDD mounting patterns.

Electrical and signal interfaces are arranged on the left side, where a single connector carries power phases and feedback wiring. Position data is produced by the integrated multiturn absolute encoder and transmitted as Digital servo feedback (DSF), allowing immediate closed-loop compensation at startup. A shaft seal prevents lubricant escape, and the keyway shaft mates directly with standard couplings; the rotor’s rear is closed because the model is supplied without a side-B shaft end. The housing is the standard version with a plain surface finish, and the balancing standard limits vibration transmission to adjacent structures.