MDD093D-N-060-N2M-110PL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
1 Seconds
The Bosch Rexroth Indramat MDD093D-N-060-N2M-110PL0 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. The motor features a nominal speed of 6000 rpm and provides a continuous torque at standstill of 24.0 Nm. It includes an integrated multiturn absolute encoder, digital servo feedback, and has a centering diameter of 110 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-060-N2M-110PL0 is a synchronous motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed to pair with digital drive controllers, the unit converts controlled electrical input into torque for positioning and velocity loops in automated production lines. Its frame size 093 and length code D suit mid-power applications, and the standard housing and balancing allow panel or machine-bed mounting without extra vibration hardware. It is intended for dynamic servo applications that require repeatable motion and stable speed control during frequent starts, stops, and directional changes.
At standstill, the motor can deliver a continuous torque of 24.0 Nm, giving the drive margin for static holding and slow-speed interpolation without overheating. Under rated excitation, it reaches a nominal speed of 6000 rpm, which is useful for spindles or pick-and-place axes that alternate between rapid traverse and fine positioning. Rotor position data come from an integrated multi-turn absolute encoder, so the controller can retain revolution information even after power is removed. This position stream is carried as Digital servo feedback (DSF), allowing direct compatibility with Rexroth drive interfaces. Mechanical alignment during installation is simplified by a centering flange diameter of 110 mm, which helps the motor seat concentrically against gearboxes or couplings.
Electrical power and feedback are routed through a connector on the left side of the stator, which can simplify cable routing on gantry or vertical axes. This arrangement can also help keep cable bends away from nearby guards and moving carriage parts. A shaft seal limits the entry of coolant or dust, and the shaft end uses a standard geometry without a side-B extension. Because the motor is supplied without a blocking brake, any static holding duty must be managed by the drive or by an external mechanical lock. Torque is transmitted through a keyway on the output shaft, supporting synchronous coupling to pulleys or rigid couplings while the standard balancing helps protect the bearings from unnecessary radial loading.
Frequently Asked Questions about MDD093D-N-060-N2M-110PL0:
Q: What is the continuous torque at standstill for the MDD093D-N-060-N2M-110PL0 motor?
A: The MDD093D-N-060-N2M-110PL0 provides a continuous torque at standstill of 24.0 Nm.
Q: What type of encoder is used in the MDD093D-N-060-N2M-110PL0 motor?
A: This model includes an integrated multiturn absolute encoder for position feedback.
Q: How is the electrical connection oriented on the MDD093D-N-060-N2M-110PL0 motor?
A: The connection is achieved using a left-facing connector on this motor.
Q: What type of shaft and seal does the MDD093D-N-060-N2M-110PL0 motor include?
A: This motor features a keyway shaft with a shaft seal for secure coupling and basic protection.
Q: What is the nominal speed for the MDD093D-N-060-N2M-110PL0 motor?
A: The MDD093D-N-060-N2M-110PL0 motor operates at a nominal speed of 6000 min⁻¹.
