MDD093D-N-060-N2M-110PA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
0 Seconds
The Bosch Rexroth Indramat MDD093D-N-060-N2M-110PA2 is a motor for digital drive controllers from the MDD Synchronous Motors series. It offers a continuous torque at standstill of 24.0 Nm and a nominal speed of 6000 min⁻¹. This model features an integrated multiturn absolute encoder, a holding brake with 22 Nm torque, and a centering diameter of 110 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-060-N2M-110PA2 is a synchronous servo motor designed by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers in automated production and handling systems where accurate rotary motion is required. Integrated motor feedback supports closed-loop operation for positioning axes, spindles, and other driven mechanisms. This arrangement helps the drive maintain stable speed and precise position control during changing load conditions.
The motor uses a centering flange of 110 mm, which provides a precise locating surface that helps keep the shaft concentric with attached mechanics. A frame designation of 093 identifies the stator diameter used for this motor size. At standstill, the windings can deliver 24.0 Nm of continuous torque, allowing the drive to hold or start demanding loads without exceeding thermal limits. Under rated electrical frequency, the motor reaches a nominal speed of 6000 rpm, which supports direct coupling to fast rotating processes without secondary gearing. An integrated holding brake supplies 22 Nm of static torque, helping secure vertical or suspended loads when power is removed. Rotor position is reported through a multi-turn absolute encoder, giving the controller absolute angular data over multiple revolutions and removing the need for a homing cycle after a restart.
The housing uses length code D, which indicates an extended stator stack while keeping the same basic frame outline. Electrical and feedback cables leave through a connection on side A by way of a keyed circular connector, which can simplify cable routing in compact machine layouts. A shaft seal is fitted at the output end, helping prevent splash water or fine dust from migrating along the shaft into the bearing cavity. Standard balancing helps reduce residual vibration, and the keyway shaft allows secure torque transfer to pulleys or couplings. The digital servo feedback format matches compatible Indramat drive controllers for proper control integration.
Frequently Asked Questions about MDD093D-N-060-N2M-110PA2:
Q: What kind of shaft is provided on the MDD093D-N-060-N2M-110PA2 motor?
A: This model comes equipped with a keyway shaft type for secure mechanical coupling.
Q: What type of encoder is used in the MDD093D-N-060-N2M-110PA2 motor?
A: A multiturn absolute encoder is integrated, enabling precise position detection.
Q: What is the holding brake torque on the MDD093D-N-060-N2M-110PA2?
A: The holding brake has a torque rating of 22 Nm for reliable holding function when the motor is not powered.
Q: What is the continuous torque at standstill for the MDD093D-N-060-N2M-110PA2 motor?
A: The rated continuous torque at standstill for this motor is 24.0 Nm.
Q: What is the nominal speed of the MDD093D-N-060-N2M-110PA2 motor?
A: Nominal speed for this model is 6000 min⁻¹, allowing for high-speed operation.
