Product Description:

The MDD093D-N-060-N2M-110PA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where commanded current is converted into regulated torque and speed for accurate axis motion in automated machinery. The 093 frame size and D length give the motor a moderate body length that fits compact machine layouts while still supporting demanding positioning, indexing, and feed tasks. This operating profile makes the unit suitable for packaging, material handling, and other applications that require repeatable motion over frequent duty cycles.

At standstill, the motor delivers 24.0 Nm of continuous torque, which helps the axis sustain load without excessive heat buildup. Its nominal speed of 6000 rpm supports rapid traversing when high axis velocity is required. A centering diameter of 110 mm helps align the motor concentrically to the mounting face for stable mechanical installation. Power and feedback leads exit on side A, and the plug-in connector supports straightforward cable attachment. The output shaft has a keyway, which allows positive torque transmission to pulleys or couplings. The motor is built with a single shaft end, so no shaft extension projects from side B.

Closed-loop control is supported by digital servo feedback from an integrated multi-turn absolute encoder, allowing the drive to monitor position across multiple revolutions without a homing routine after startup. A shaft seal at the front bearing carrier helps limit contaminant ingress at the journal and protects the bearing area during operation. Because the unit is supplied without a blocking brake, any required holding force at standstill must be provided by the drive or by external mechanical hardware. This arrangement keeps the motor focused on dynamic motion while leaving static load retention to the surrounding machine design.