Product Description:

The MDD093D-N-060-N2M-110GR2 is a synchronous servo motor built by Bosch Rexroth Indramat and positioned within the MDD Synchronous Motors series. It is intended for use with digital drive controllers in automated assembly lines, packaging modules, and material-handling axes where accurate torque production and rapid speed changes are required. By converting controller output into regulated mechanical rotation, the unit supports coordinated multi-axis motion in equipment that depends on repeatable positioning, stable speed control, and responsive reversing behavior.

The motor’s nominal speed reaches 6000 rpm, enabling fast cycle times in machinery that accelerates and decelerates frequently. At standstill, it supplies a continuous torque of 24.0 Nm, allowing the axis to maintain load position under steady operating conditions. The centering diameter is 110 mm, which provides accurate alignment on compatible mounting surfaces. Motion feedback is handled through digital servo feedback (DSF), giving the drive controller position and speed data for closed-loop current and velocity regulation. The motor uses length code D, which indicates the longer housing format in this frame size and supports the rotor mass needed for its output range.

An integrated multiturn absolute encoder retains shaft position across power cycles, so the drive can recover the axis location without a homing sequence after shutdown. Secure holding during inactivity is provided by a blocking brake rated at 22 Nm, which helps keep the shaft from moving when the axis is stopped. The output interface is a plain shaft, and it passes through a shaft seal that helps limit the entry of dust and fluids near the bearing area. Power and feedback connections are arranged on the right side, which can simplify cable routing where the motor is mounted close to machine guards or frame members. The shaft extends on side A, matching the standard single-shaft arrangement used for this motor platform.