Product Description:

The MDD093D-N-060-N2M-110GL2 is a servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Within a digital drive system, this motor converts regulated electrical power from the controller into mechanical rotation for axes that require rapid positioning and continuous duty. Its mechanical frame follows the 093 size code and the D-length stacking, allowing it to deliver higher torque density while still fitting common machine interfaces used in packaging, printing, and material-handling automation.

At standstill, the motor can develop a continuous torque of 24.0 Nm, so static loads remain supported without overheating when the axis is clamped or held at a reference position. A blocking brake is integrated and supplies 22 Nm of mechanical holding force after power removal, preventing back-driving on vertical or suspended mechanisms. During motion, the rotor can reach a nominal speed of 6000 rpm, a range suited to fast indexing tables and high-throughput spindles. The centering collar measures 110 mm in diameter, letting the flange mate directly to standard IEC mounting faces while keeping radial runout low. Power is transmitted through a plain shaft that simplifies the coupling arrangement and works with external keys or friction hubs, and an internal shaft seal limits lubricant migration toward the motor interior.

Electrical links are made through a rugged connector positioned on the left side of the stator housing, a layout that helps cable routing when several motors are mounted in series along a machine bed. Rotor motion and position are reported to the drive via digital servo feedback (DSF) generated by the integrated multi-turn absolute encoder, enabling tight velocity loops and automatic homing without external switches. Standard dynamic balancing keeps vibration within ISO limits, and the motor’s sealed housing withstands oil mist and fine dust encountered in automated assembly lines.