Product Description:

The MDD093D-N-060-N2M-110GL0 belongs to the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. It is intended for use with digital drive controllers and converts electrical commands into precise rotary motion for automated machinery. With motor size code 093 and length code D, the unit fits medium-frame axes where rapid speed changes and tight position control are required. Its standard housing and standard dynamic balancing support direct installation on machine structures without added vibration-damping components.

This model delivers a continuous standstill torque of 24.0 Nm, so the drive can hold demanding loads without excessive thermal stress. During operation, it can reach a nominal speed of 6000 rpm, which supports fast indexing and high-throughput cycles. Position data is returned through digital servo feedback (DSF), while rotor angle is captured by an integrated multi-turn absolute encoder. This feedback combination allows the controller to monitor position accurately through repeated revolutions and changing speed conditions. Because the motor is supplied without a blocking brake, static holding force must be provided by the drive or by external mechanics. Connections exit on the left side, which suits machine layouts that route power and feedback cables in that direction.

A centering diameter of 110 mm aligns the flange precisely against gearboxes or machine plates, helping maintain accurate shaft positioning at the mounting face. The electrical interface uses a sealed connector, which keeps cable attachment compact and orderly. The rotor has a plain shaft without a side B extension, so couplings mount only on the drive end. A shaft seal helps keep coolant and lubricants out of the bearing cavity during operation. The housing also keeps mass concentrated around the stator, which supports compact inertia and stable motion behavior.