Product Description:

The MDD093D-N-060-N2M-110GB1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts drive current into mechanical rotation for positioning and velocity tasks in automated machinery, packaging lines, and material-handling stations. Its synchronous design supports accurate speed regulation and repeatable axis movement when paired with a compatible controller.

Under rated conditions, the motor delivers a continuous torque at standstill of 24.0 Nm, allowing closed-loop drives to hold loads without additional gearing. When commanded, it can reach a nominal mechanical speed of 6000 rpm, so fast axis cycles are possible while the windings remain within their thermal range. The cast stator flange has a centering diameter of 110 mm, which helps align the housing with machine frames or gearboxes and reduces radial runout. Power, brake, and encoder leads exit on Side B, and the motor uses a single plug-in connector to simplify cable attachment and removal. A plain shaft transfers torque directly into couplings or pulleys, and the one-sided cable exit helps keep routing contained in compact machine layouts.

Feedback and holding functions are integrated into the motor. The blocking brake supplies 11 Nm of static torque to secure vertical or suspended loads when power is off. Position data is transmitted to the drive through Digital servo feedback (DSF) from an integrated multi-turn absolute encoder, allowing indexed moves without a homing routine after startup. A shaft seal protects the front bearing area from coolant or dust, and the housing helps dissipate heat through the machine mount. The motor has a length code of D and a frame size of 093, which indicate its axial length and mounting envelope.