Product Description:

The MDD093D-N-060-N2M-110GA1 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded currents into precise rotary motion for positioning and velocity loops on machine tools, packaging lines, and material-handling axes. The mechanical envelope follows the 093 frame size with a standard housing, so mounting and cabling remain consistent across installations. Its synchronous design supports fast response to changing commands from a compatible drive controller, which helps maintain stable motion during demanding axis movement.

The motor reaches a nominal speed of 6000 rpm, which is its continuous operating speed at rated frequency and voltage. At standstill, it can deliver 24.0 Nm of continuous torque, allowing static loads to be supported without overheating. A blocking brake rated for 11 Nm keeps the axis locked during power loss. Accurate alignment during installation is simplified by a centering diameter of 110 mm, and all power and feedback leads exit on side A. Standard dynamic balancing minimizes residual vibration, and the housing style accepts cabinet airflow for convection cooling.

Control fidelity relies on the built-in Digital servo feedback (DSF) system, which pairs an integrated multi-turn absolute encoder with the drive to keep position error minimal throughout the operating range. Because the encoder is multi-turn, position data remains available across multiple revolutions after startup. Signals and power are carried through a single connector, which reduces the number of separate cable entries at the motor housing, and the motor includes a shaft seal to limit oil or coolant ingress at the bearing journal. The rotor interface is a plain shaft with a standard shaft end on side A only, avoiding overhang on side B and keeping inertia low for the D-length stator stack.