Product Description:

The MDD093D-N-060-N2M-110GA0 is a synchronous motor manufactured by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Designed for digital drive controllers, it converts controlled current into precise rotary motion for positioning tables, feed axes, and other automated equipment where accurate velocity regulation is required. Its synchronous design supports repeatable motion response in closed-loop systems that depend on stable speed and position control.

At the flange, the motor has a centering diameter of 110 mm, allowing rigid seating on gearboxes or machine frames. Standard dynamic balancing keeps vibration low at its maximum nominal speed of 6000 rpm. Under stall conditions, the stator can deliver a continuous torque of 24.0 Nm, so the axis can hold or start heavy loads without overheating. All electrical terminations are routed on Side A, and the motor uses a connector interface for a compact electrical connection. The size code 093 and length code D correspond to a longer active stack within this frame, while the standard housing protects the windings without increasing overall diameter.

For position control, the motor returns high-resolution feedback through digital servo feedback (DSF) supported by an integrated multiturn absolute encoder. Because it is supplied without a blocking brake, any static holding must be provided by the drive or an external clamp, which helps keep overall mass lower. The output shaft is a plain shaft without a side B extension, and a shaft seal is fitted to limit oil or coolant ingress into the bearing cavity. Motor feedback signals travel through the same connector family used for power, which reduces cabling variety. The motor relies on convection or machine-supplied cabinet airflow because no external fan is installed.