Product Description:

The MDD093D-N-060-N2L-130PR1 is a brushless AC servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers in pick-and-place modules, packaging stations, and handling axes that require rapid acceleration and accurate speed control. In servo systems, this motor converts controlled current into precise rotary motion, allowing the drive to manage acceleration, deceleration, and steady-state speed with high repeatability. Its 093 motor size places it in the mid-torque range while keeping the housing compact enough for standard mechanical interfaces.

At stall, the motor can deliver 24.0 Nm, allowing the axis to resist load torque while current is limited by the controller. During dynamic cycles, it reaches a nominal speed of 6000 rpm, so a single gear stage is often enough to achieve application speed. The flange has a centering recess of 130 mm that locates the housing accurately in the machine frame. Power and feedback exit on the right side through a keyed connector, and rotor position is returned by digital servo feedback (DSF) for closed-loop motion control. This feedback method gives the controller continuous position and speed information, which helps maintain smooth motion under changing loads.

A blocking brake rated at 11 Nm secures vertical or suspended loads when power is removed, and the brake is energized through the same connector set. The single-ended shaft uses a keyway for direct torque transmission to pulleys or couplings. It also has a shaft seal that helps limit oil or coolant ingress along the journal and protect the bearing area from contamination. The D frame length gives this motor the longer body style for its size. The brake is intended to hold the axis at standstill rather than perform routine deceleration during normal operation.