Product Description:

The MDD093D-N-060-N2L-130PR0 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is built for direct connection to digital drive controllers where precise torque and velocity loops are required on automated axes. In operation, the motor converts commanded current from the controller into rotational motion for accurate positioning of machine tooling, conveyor sections, or packaging spindles. This type of response is useful on dynamic axes that need repeatable motion during acceleration, steady running, and controlled stopping.

This model supplies a continuous stall torque of 24.0 Nm, enabling stable holding or slow-speed operation under load without thermal overload. When the control system demands rapid motion, the rotor can reach a nominal speed of 6000 rpm, which supports fast cycle times on lighter inertia mechanisms. Mechanical alignment to the mounting flange is aided by a centering diameter of 130 mm, which helps keep couplings and gearboxes concentric during installation. Power and feedback conductors exit on the right side, so the machine layout should leave clearance on that face for cable routing and bend radius. Rotor position and velocity are returned to the controller through digital servo feedback, providing high-resolution information for closed-loop regulation.

The motor has a shaft seal, which helps limit lubricant escape and reduce particulate entry at the output end. Its output shaft uses a keyway, allowing slip-free torque transfer to hubs or pulleys. Because the motor is supplied without a blocking brake, any static load must be held by the drive’s electromagnetic torque or by an external brake. The overall mechanical package uses length code D, which indicates a longer stator stack while keeping the 093 frame profile. This layout supports the listed torque capability without changing the basic frame size.