Product Description:

The MDD093D-N-060-N2L-130PL0 is a permanent-magnet synchronous motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for use with digital drive controllers, it delivers the torque and feedback needed for accurate positioning in packaging, assembly, and material handling equipment. In operation, the motor converts stator-supplied AC into rotary motion while its encoder channel returns real-time shaft data to the drive. This closed-loop arrangement helps the axis maintain stable speed and repeatable positioning during rapid motion changes.

At standstill, the motor produces a continuous torque of 24.0 Nm, allowing it to hold or index loads without overheating under rated conditions. Once energized, the rotor can reach a nominal mechanical speed of 6000 rpm, which suits high-speed spindle or feeder axes. Precise mounting is supported by a centering diameter of 130 mm, which aligns the stator housing concentrically on a machine plate. Power and feedback conductors exit on the left side, which can simplify cable routing in tight cabinets. Position data is transmitted through digital servo feedback, allowing the controller to close the velocity and position loops with high resolution.

The motor uses size 093 with the compact D body length, which helps it fit narrow machine layouts. A keyway is machined into the shaft to transmit torque through keyed couplings, and a shaft seal is installed to limit coolant or dust ingress at the bearing journal. The motor is supplied without a blocking brake, so applications that require passive holding during power-off must use an external brake or rely on drive torque. It is provided in the standard uncooled configuration with connector-style termination, and the design omits a side-B shaft end to keep the package shorter and reduce overhung load on the front bearing.