Product Description:

The MDD093D-N-060-N2L-130PB0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Supplied for use with digital drive controllers, it converts controlled current into rotary motion for indexing tables, pick-and-place arms, and other automated axes. The frame size 093 and standard housing fit common machine interfaces, which helps the motor integrate into established mounting layouts. Its overall design supports precise speed and position control where repeatable motion and stable torque are required during continuous industrial operation.

Under stall conditions, the unit can deliver 24.0 Nm of continuous torque, which allows it to hold substantial static loads without exceeding thermal limits. When energized by the drive, the rotor reaches a nominal speed of 6000 rpm, supporting fast cycle rates on high-throughput machinery. The flange uses a 130 mm centering diameter to align the motor accurately with adjoining hardware, and the rotor is balanced to the standard grade to keep residual vibration within normal limits. A shaft seal helps keep contaminants from migrating along the shaft, while digital servo feedback returns position data to the controller for closed-loop operation.

All electrical terminations are on Side B and use a molded connector that can be uncoupled without rewiring the entire cable set. The motor is supplied without a blocking brake, so vertical axes must rely on external holding devices or drive torque when the axis is parked. The length code D uses a longer active section than shorter versions, which increases continuous output while keeping a single working shaft. Torque is transmitted through a keyway, providing positive engagement with pulleys and couplings during acceleration, deceleration, and steady-state operation.