MDD093D-N-060-N2L-130PA0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
8 Seconds
The Bosch Rexroth Indramat MDD093D-N-060-N2L-130PA0 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It features a nominal speed of 6000 rpm and delivers a continuous torque at standstill of 24.0 Nm. The motor has a 130 mm centering diameter, standard housing, and uses digital servo feedback for motor feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093D-N-060-N2L-130PA0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, it converts electrical commands into precisely regulated mechanical rotation for automated axes, pick-and-place gantries, and other industrial positioning tasks. Its compact housing and responsive rotor behavior make it suitable for tightly coordinated multi-axis machines where repeatable motion, quick acceleration, and stable speed control are required. This motor format is commonly used where direct installation and accurate closed-loop operation are needed without adding unnecessary mechanical bulk.
It provides a continuous standstill torque of 24.0 Nm, allowing the axis to hold load at zero speed without external gearing. When paired with a suitable drive, the rotor reaches a nominal speed of 6000 rpm, which supports fast indexing and short cycle times in packaging, transfer, and indexing applications. The flange has a 130 mm centering diameter to align the motor accurately on the machine interface and keep mounting concentricity consistent. Position and velocity are transmitted through digital servo feedback (DSF), allowing closed-loop control with high resolution and dependable feedback to the controller. The motor is supplied without a blocking brake, and the D length code increases active stack height within the 093 frame for higher torque density.
Power, signal, and protective earth conductors exit on Side A, and the motor uses a connector interface that keeps electrical termination compact and serviceable. The output shaft uses a keyway for positive torque transmission to pulleys or couplings, and side B does not include a secondary shaft end. Operation is provided with a shaft seal, which helps limit contaminant entry and supports the IP65 enclosure class used in the series. With the cable exit concentrated at one end, the motor can be integrated into enclosed machine layouts with cleaner routing and less obstruction around the mounting face.
Frequently Asked Questions about MDD093D-N-060-N2L-130PA0:
Q: What is the nominal speed for the MDD093D-N-060-N2L-130PA0 motor?
A: The MDD093D-N-060-N2L-130PA0 operates at a nominal speed of 6000 min⁻¹, supporting applications that require high-speed rotation.
Q: What is the continuous standstill torque of the MDD093D-N-060-N2L-130PA0?
A: This model has a continuous torque at standstill of 24.0 Nm, ensuring consistent torque delivery during stationary operation.
Q: What type of feedback does the MDD093D-N-060-N2L-130PA0 motor use?
A: Digital servo feedback (DSF) is used for motor feedback, enabling precise position and speed control.
Q: What type of shaft is included with the MDD093D-N-060-N2L-130PA0?
A: The shaft on this motor is equipped with a keyway and a shaft seal for secure coupling and added protection against contaminants.
Q: Is a holding brake included with the MDD093D-N-060-N2L-130PA0 motor?
A: There is no holding brake included on this model, meaning it will not be held in position when unpowered.
