Product Description:

The MDD093D-N-060-N2L-130GR1 belongs to the MDD Synchronous Motors series produced by Bosch Rexroth Indramat. It is a permanent-magnet AC servo motor intended for use with compatible digital drive controllers, where it converts commanded current into precise rotary motion for automated axes. Because the motor works in a closed-loop servo system, it can respond quickly to command changes while maintaining consistent axis behavior through repeated production cycles. This operating profile suits assembly cells, packaging stations, and indexing tables that require accurate starts, stops, and direction changes.

The motor face centers on a 130 mm pilot, providing a reference surface for rigid mounting and low runout. When energized but motionless, it can maintain a continuous holding torque of 24.0 Nm, so it can resist static process forces without overheating during normal operation. Under rated excitation, the rotor reaches 6000 rpm, supporting high-speed pick-and-place cycles. Power and feedback conductors exit on the right side through a shielded connector, which helps keep cable routing orderly when multiple axes are mounted close together. Position information is returned via digital servo feedback, so the drive can close its control loop with multi-turn data rather than relying on incremental signals.

A blocking brake clamps the shaft with 11 Nm of torque during power-off conditions, preventing drift on vertical or suspended loads. Contaminant ingress at the output journal is limited because the housing is supplied with a shaft seal, which helps protect the bearing area in washdown or cutting-fluid environments. The plain shaft profile allows direct coupling to timing pulleys or gear hubs without keyways, which can help reduce backlash during reversing motion. ISO 1940 balancing to the standard grade keeps residual vibration low and supports smooth operation when the motor is flange-mounted to precision equipment.