Product Description:

The MDD093D-N-060-N2L-130GR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it supplies closed-loop torque and speed in pick-and-place modules, packaging spindles, and indexing axes that demand fast response and repeatable motion profiles. Its synchronous design supports accurate acceleration and stable speed control during repeated motion cycles.

The motor can deliver a continuous standstill torque of 24.0 Nm, so it can hold loads at zero speed without thermal overload under rated conditions. Its rated operating speed reaches 6000 rpm, enabling high surface speeds on tightly geared mechanisms. A centering shoulder measuring 130 mm simplifies concentric mounting to gearboxes or flange plates and helps limit radial misalignment. Power and feedback conductors exit on the right side, using the Right connection direction, and terminate through a factory-installed Connector, which helps maintain shielding continuity inside the cabinet.

The rotor is balanced to the standard grade, reducing residual vibration across the housing and helping protect bearings during sustained high-speed duty. Position data is returned through digital servo feedback, so the controller receives high-resolution angle information for tight velocity and position loops. The motor is supplied without a blocking brake, so the load must be secured by external clamping or drive torque when power is removed. An axial output-end seal is provided as a shaft seal, which helps limit lubricant migration and supports use where coolants or light splash are present. Coupling to the application is direct because the rotor uses a plain shaft, and the single-ended design avoids added overhung mass at a second shaft end. The D motor length and 093 frame size give the unit a larger envelope within this motor family, which helps match torque capacity to demanding axis loads.