Product Description:

The MDD093D-N-060-N2L-130GL2 is a synchronous motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It serves as the rotary actuator in digital drive systems, where the controller supplies modulated currents and monitors feedback to achieve commanded position, velocity, and acceleration profiles. By directly coupling to machine tooling, conveyor sections, or auxiliary axes, the unit enables closed-loop motion control without mechanical transmissions, improving repeatability and simplifying maintenance in automated assembly lines, packaging machines, and material-handling equipment. Its synchronous design supports precise regulation during indexing, transfer, and positioning tasks.

The motor uses size code 093, and the active body is extended to length code D, giving additional stator volume for higher torque density. The centering pilot measures 130 mm, allowing rigid flange mounting to gearboxes or machine plates that share this register diameter. During operation, it can deliver a continuous standstill torque of 24.0 Nm through the standard housing. Peak mechanical speed reaches 6000 rpm, so the associated drive must accommodate high electrical frequencies. Standard balancing reduces residual vibration during fast moves, and the single-piece connector interface keeps power and feedback connections organized on the machine.

For position holding during power removal, the motor is supplied with a blocking brake capable of 22 Nm of static torque. Electrical and feedback connectors exit on the left side, which can help when adjacent axes leave limited room for cable bends. Rotor position is reported through digital servo feedback, enabling the controller to handle commutation and diagnostic routines without separate sensors. A shaft seal protects the bearing set against coolant mist, and the output end uses a plain shaft to pair with clamp-style couplings and reduce backlash in high-speed service.