Product Description:

The MDD093D-N-060-N2L-130GB2 is a servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended to work with digital drive controllers, providing closed-loop speed and position regulation in automated machinery and material-handling axes where repeatable motion is required. This motor is suited for applications that need accurate acceleration, controlled stopping, and stable speed regulation over repeated cycles. The motor has size code 093 and extended length code D, which give the frame additional active iron depth, so this model can generate higher torque at elevated speeds while still fitting standard flange patterns used across the series.

At standstill, the motor can deliver a continuous torque of 24.0 Nm, allowing it to hold or start loads without thermal overload. Under rated supply and drive signals, it reaches a nominal mechanical speed of 6000 rpm, and this high base speed supports fast indexing and shorter process cycles. Mechanical mounting is centered by a 130 mm pilot diameter, ensuring coaxial alignment with gearboxes or machine frames. Power and feedback leads exit on side B, a connection layout that can simplify cabinet cable routing when the shaft faces the operator. Position information is returned through digital servo feedback, enabling the controller to apply precise current vectors and maintain dynamic accuracy.

For holding duties during power-off events, the integrated brake supplies 22 Nm of static torque, preventing vertical or suspended axes from drifting. The motor has a plain shaft for direct coupling with clamped hubs or taper bushings, and a shaft seal helps keep lubricant and contaminants separated from the stator internals. This shaft style is commonly used where a keyed connection is not required, and the sealed shaft area helps protect internal parts near lubricated couplings. Rotor and coupling parts use standard balance quality, so vibration remains within ISO limits at full rated speed. The housing uses the standard enclosure style, and the motor is intended for installation in free-convection cabinets.