Product Description:

The MDD093D-N-060-N2L-130GB1 synchronous motor is produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it supplies rotary motion that can be closely regulated by servo amplifiers in automated machinery. Its plain shaft couples directly to gearboxes or other driven elements, and the integrated feedback interface sends absolute position data to the controller. Because the feedback system is built into the motor, the drive can monitor rotor position continuously and maintain accurate speed and positioning in assembly systems, packaging equipment, and handling applications.

The motor reaches a rated velocity of 6000 rpm, which supports rapid indexing and short cycle times when the axis must accelerate and settle quickly. Its continuous standstill torque is 24.0 Nm, indicating the torque it can hold at zero speed while current remains at nominal levels. Encoder data are returned through digital servo feedback, allowing the drive to correct current in real time and maintain smooth motion under changing load. Mechanical alignment is supported by a centering diameter of 130 mm, and all power and signal plugs are oriented toward side B, which can simplify cable routing where service access is limited to one side of the machine.

During power loss, the blocking brake can clamp the shaft with 11 Nm of holding torque to help prevent unintended movement. The motor is supplied with a shaft seal, which helps keep contaminants out of the bearing area and supports use next to coupled mechanical components. The motor has size code 093 and an extended D length, providing a longer active section within this frame. The plain shaft is present only on the drive side, so there is no secondary shaft extension on side B, and the rear of the motor stays more compact.