MDD093D-N-060-N2L-130GA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
25 Seconds
The Bosch Rexroth Indramat MDD093D-N-060-N2L-130GA2 is a motor for digital drive controllers in the MDD Synchronous Motors series. It offers a continuous torque at standstill of 24.0 Nm and features a nominal speed of 6000 min⁻¹. This motor has a plain shaft, comes with a blocking brake with 22 Nm holding torque, and includes digital servo feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat’s MDD093D-N-060-N2L-130GA2 is a synchronous servo motor within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into controlled mechanical rotation for positioning and speed-regulated axes in automated machinery. The model is suited for handling, packaging, and processing applications where closed-loop control must maintain stable motion during frequent starts, stops, and direction changes. Its synchronous design also supports responsive acceleration and smooth speed control when paired with a compatible digital amplifier.
The servo delivers a nominal speed of 6000 rpm, allowing fast traverse cycles when paired with high-bandwidth drives. At standstill, it can generate 24.0 Nm of continuous torque, which supports loaded indexing and steady holding under commanded current. A blocking brake is installed, and its mechanical holding torque reaches 22 Nm, so the axis can remain secured when power is removed. Position and velocity data are returned through digital servo feedback (DSF), enabling the controller to close precise motion loops without an external encoder. This feedback arrangement lets the drive monitor rotor position continuously and correct deviations caused by changing load conditions. For mechanical alignment, a centering shoulder of 130 mm is machined into the flange to support accurate mounting and consistent shaft concentricity.
Electrical and feedback conductors exit on side A through a keyed connector, keeping cable routing concentrated on one end of the motor. This layout separates the cable entry area from the coupling side, which can help keep surrounding machine space organized in compact installations. The output uses a plain shaft, and the shaft seal helps limit the entry of dust or coolant around the bearing area. This 093-frame motor has a length code of D, which gives it a longer active section than shorter versions in the same frame size. The longer body supports higher magnetic active volume while keeping the same general mounting format. Because the shaft end is present only on the drive side, the rear of the motor remains open for adjacent components or tighter installation spacing.
Frequently Asked Questions about MDD093D-N-060-N2L-130GA2:
Q: Does the MDD093D-N-060-N2L-130GA2 motor come with a holding brake?
A: This model includes a blocking brake, providing secure holding during power-off scenarios.
Q: What type of motor feedback does the MDD093D-N-060-N2L-130GA2 use?
A: The MDD093D-N-060-N2L-130GA2 features digital servo feedback (DSF) for precise motor position detection.
Q: What is the continuous torque at standstill for the MDD093D-N-060-N2L-130GA2?
A: The continuous torque at standstill is rated at 24.0 Nm for this motor.
Q: What is the nominal speed of the MDD093D-N-060-N2L-130GA2 motor?
A: It operates at a nominal speed of 6000 min⁻¹, allowing for high-speed applications.
Q: What is the shaft configuration on the MDD093D-N-060-N2L-130GA2 motor?
A: The shaft of this model is a plain shaft and is equipped with a shaft seal for protection.
