Product Description:

The MDD093D-N-060-N2L-110PR0 is a synchronous AC motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts precisely modulated current into rotational motion for positioning and speed control in automated production lines, packaging modules, and handling systems. Its synchronous design supports accurate response to command changes during repetitive machine cycles. The motor uses size 093 and length code D for its mechanical envelope, and the housing and balancing are supplied in a standard configuration.

This model sustains a continuous standstill torque of 24.0 Nm, allowing the axis to hold loads without thermal overload when motion is paused. During regular operation, it can reach a nominal speed of 6000 rpm, which supports rapid cycle times in indexing tables or spindles. The centering diameter of 110 mm aligns the front flange with gearboxes or machine frames for accurate concentricity. A factory-mounted shaft seal helps block coolant spray and fine particulates from entering the bearing chamber. Position data is returned through digital servo feedback (DSF), enabling high-resolution closed-loop control by the connected drive. All power and feedback conductors exit through right-side connections using a circular connector, which helps with cable routing inside narrow enclosures.

The motor uses standard balancing, which helps limit vibration at full rated speed. Its output shaft has a keyway, providing a positive drive interface for pulleys, couplings, or pinions without relying on friction alone. The motor is supplied without a blocking brake, so vertical or holding duties require an external brake or drive-applied torque when power is removed. The design also omits a side-B shaft end, and the single connector arrangement keeps the motor layout compact while leaving the rear of the housing closed.