Product Description:

The MDD093D-N-060-N2L-110PL2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, the unit supplies controlled torque and speed to rotary axes in industrial automation systems that require accurate position tracking and tight velocity regulation. Its 093 frame size and D length code place it in the higher power range of the series while keeping the overall envelope compatible with standard machine frames. This makes the motor suitable for indexing tables, feed axes, and handling units that need stable closed-loop motion.

The stator winding of this model delivers a continuous standstill torque of 24.0 Nm, allowing the axis to hold load without overheating during prolonged dwell periods. At its rated electrical frequency, the rotor can reach a nominal speed of 6000 rpm, which supports short cycle times in packaging and material-handling equipment. Accurate commutation and position verification are achieved through the integrated Digital servo feedback (DSF) encoder, which sends position data to the drive for closed-loop control. Installation is simplified by the left-oriented power and feedback connectors, so cables can exit toward the machine interior when the motor is face-mounted. A centering diameter of 110 mm aligns the flange precisely and helps reduce concentricity errors.

The mechanical interface uses standard balancing to minimize residual unbalance, and the shaft is machined with a keyway for direct connection to common pulleys or couplings. A factory-installed blocking brake supplies 22 Nm of holding torque, allowing the axis to remain locked when power is removed. Electrical terminations are made through a sealed connector, which avoids exposed screw lugs and keeps wiring more compact. The front bearing region is built with a shaft seal to limit lubricant escape and reduce the entry of airborne particles. The standard housing and single-ended shaft fit enclosed transfer lines and gantry modules where repeatable motion and secure mechanical coupling are required.