Product Description:

The MDD093D-N-060-N2L-110PL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for connection to digital drive controllers, the unit converts commanded current into controlled torque and speed for positioning, feed, and interpolation axes on automated machinery. Its design supports rapid acceleration, compact mounting, and integrated feedback so that production equipment can maintain repeatable motion profiles in machining centers, printing lines, and assembly cells. It is well suited to applications where interpolated motion and frequent speed changes occur throughout long operating cycles. The motor also fits compact axis layouts that need precise response during repeated starts, stops, and reversals.

It delivers a continuous standstill torque of 24.0 Nm, allowing the axis to hold load without overheating when the shaft is locked. The rotor can reach a nominal speed of 6000 rpm, matching high-speed duty cycles that demand short move times. Position data returns through Digital servo feedback (DSF), enabling the controller to close the loop without an external encoder. Power and feedback conductors exit on the left side, and the cables terminate on a standard connector interface, which helps when cable routing is fixed by the machine layout. A keyway shaft transmits torque by positive locking, preventing slippage under reversing loads, while the standard housing and 093 frame size keep inertia moderate and provide adequate thermal mass for continuous operation.

A centering diameter of 110 mm aligns the motor accurately in the machine frame and helps maintain proper fit during operation. The motor is equipped with a shaft seal that keeps lubricants inside and airborne contaminants outside. Because the unit is supplied without a blocking brake, vertical axes must rely on drive torque or external clamps for position holding when power is off. Balancing is standard to limit vibration at rated speed, and frame length code D indicates the longest active stack in the 093 family, providing higher continuous torque while maintaining a single shaft end without a side B extension.