Product Description:

The MDD093D-N-060-N2L-110PB2 is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for digital drive controllers, it converts commanded current into precise rotary motion for automated assembly, packaging, and handling axes. Integrated encoder electronics and a blocking brake are housed within the motor, supporting closed-loop positioning without external add-ons. This arrangement helps keep axis layouts compact and supports accurate starts, stops, and position changes during repetitive machine cycles. It is suited for servo axes that require repeatable motion under changing load conditions throughout production.

The motor supplies a continuous standstill torque of 24.0 Nm, enabling it to resist static loads without overheating when the axis is locked. Under dynamic operation, it can spin up to 6000 rpm, which suits rapid indexing tasks where short cycle times are important. A built-in brake delivers 22 Nm of holding torque, so gravitational or inertial forces are restrained whenever power is removed. Mounting is centered by a 110 mm pilot diameter, providing concentric alignment between the housing and adjoining machine frames. Position information is returned through digital servo feedback, allowing the drive to close velocity and position loops with single-turn precision. Standard balancing helps limit residual vibration, and the connector orientation on side B keeps power and feedback plugs clear of adjacent axes.

The motor has size 093 and length code D, giving it a deeper stator stack without changing the frame diameter. Torque is transmitted through a keyway shaft, while a shaft seal helps keep coolant splash and fine dust away from the bearing chamber. This shaft arrangement works well with pulleys, couplings, and gears that need a positive mechanical connection. There is no secondary shaft extension on the rear face, so only one drive end needs to be accommodated in the machine layout. The housing uses a compact connector layout that leaves more usable space around the motor body in tightly spaced assemblies.